Melting AZS TY - AZS33: The Solution to Glass Furnace Component Corrosion

In the glass production industry, glass furnace components often face common problems such as corrosion and solidification. These issues can significantly affect the efficiency and quality of glass production, leading to increased costs and reduced productivity. This is where Melting AZS TY - AZS33 comes into play.

Product Composition

Melting AZS TY - AZS33 is made from pure alumina powder and zircon sand. Zircon sand, a natural mineral, consists mainly of zirconium silicate (ZrSiO₄). The Al₂O₃－ZrO₂－SiO₂ composition in this product has a profound significance. According to scientific research, the combination of these three components forms a unique chemical structure. Alumina (Al₂O₃) provides high - temperature resistance and mechanical strength. Zirconia (ZrO₂) enhances the material's resistance to corrosion and thermal shock. Silica (SiO₂) helps in the formation of a dense structure during the melting process.

For example, in a laboratory test, the proportion of Al₂O₃ in Melting AZS TY - AZS33 is about 33%, ZrO₂ is around 17%, and SiO₂ is approximately 50%. This precise ratio is carefully formulated to achieve the best performance.

Microstructure and Performance

Based on the above - mentioned composition, Melting AZS TY - AZS33 forms a dense microstructure. This structure gives the product strong resistance in the glass liquid. Compared with ordinary materials, the dense structure of Melting AZS TY - AZS33 can effectively prevent the penetration of corrosive substances in the glass liquid. In a comparative experiment, the corrosion rate of ordinary materials in the glass liquid was about 5% per month, while the corrosion rate of Melting AZS TY - AZS33 was less than 1% per month, which shows its excellent performance.

Application Scenarios in Glass Furnaces

Melting AZS TY - AZS33 has a wide range of application scenarios in glass furnaces. In the melting zone, it can withstand the high - temperature and corrosive environment of the glass liquid, ensuring the stable melting process. In the refining zone, its excellent resistance to corrosion helps to purify the glass liquid and improve the quality of the final product. In the working tank, it can prevent the adhesion and corrosion of the glass liquid on the furnace wall, thus prolonging the service life of the furnace components.

Success Cases

Many glass production enterprises have benefited from using Melting AZS TY - AZS33. For instance, a large - scale glass manufacturing company in Europe used this product in their glass furnace. After the replacement, the production efficiency increased by 20% due to the reduced downtime caused by component corrosion. At the same time, the quality of the glass products improved significantly, with the defect rate decreasing from 5% to 1%.

Conclusion and Call to Action

In conclusion, Melting AZS TY - AZS33 perfectly combines the right composition and excellent performance. Its unique chemical composition forms a dense microstructure, which endows it with strong resistance in the glass liquid. This product can effectively solve the corrosion problems of glass furnace components, improve production efficiency, and enhance product quality.

If you are a glass production enterprise looking for a reliable solution to glass furnace component corrosion, don't hesitate to choose Melting AZS TY - AZS33. Based on a scientific formula and reliable performance, it will surely bring you unexpected benefits. Contact us now to start your journey of high - efficiency glass production!