High-Zirconium Fused Cast Brick TY - Z88: All-Round Application in Glass Furnaces

In the glass furnace industry, challenges such as glass liquid contamination and short service life of refractory materials have long been pressing issues for manufacturers. These problems not only affect the quality of glass products but also increase production costs. The High-Zirconium Fused Cast Brick TY - Z88 emerges as a reliable solution to address these concerns.

Production Process and Performance

The High-Zirconium Fused Cast Brick TY - Z88 is crafted from high-purity artificial raw materials using a special casting process. This unique production method results in a crystal structure dominated by baddeleyite. Baddeleyite gives the brick excellent corrosion resistance, with a corrosion rate 30% lower than ordinary refractory bricks in high-temperature and corrosive glass liquid environments. Moreover, it has a low potential for causing blisters and stones in the glass, effectively preventing glass liquid contamination. This means that manufacturers can produce high - quality glass products with fewer defects, significantly improving product yields.

Two Models and Their Features

There are two models of High-Zirconium Fused Cast Brick TY - Z88: TY - Z88 - WS and TY - Z95 - WS. The TY - Z88 - WS model has a zirconia content of about 88%. It offers a balanced performance in terms of corrosion resistance and cost - effectiveness. It is suitable for general glass furnace applications where the requirements for glass quality are relatively high but cost control is also important. On the other hand, the TY - Z95 - WS model has a zirconia content of up to 95%. It provides superior corrosion resistance and is ideal for use in glass furnaces producing high - quality specialty glass, such as optical glass and high - performance display glass.

Applications in Glass Furnaces

The High-Zirconium Fused Cast Brick TY - Z88 can be used in key parts of various glass furnaces, such as the melting tank, the throat, and the feeder channel. These parts are in direct contact with the high - temperature and corrosive glass liquid, and the excellent performance of the TY - Z88 ensures long - term stable operation of the furnace. By using the appropriate model in different parts, manufacturers can optimize the performance of the furnace and reduce maintenance costs.

Suitable Glass Types

This product is suitable for a wide range of glass types, including common soda - lime glass, borosilicate glass, and high - quality specialty glass such as optical glass, LCD glass, and solar glass. Whether it is for mass - produced ordinary glass or high - value specialty glass, the High-Zirconium Fused Cast Brick TY - Z88 can meet the production requirements.

Customer Selection Advice

When choosing the High-Zirconium Fused Cast Brick TY - Z88, customers should consider their specific glass production requirements. If you are producing general glass products and need to control costs, the TY - Z88 - WS model is a good choice. For high - end specialty glass production where product quality is of utmost importance, the TY - Z95 - WS model is recommended. Additionally, proper installation in different key parts of the furnace according to the product's characteristics can further enhance the performance of the glass furnace.

In conclusion, the High-Zirconium Fused Cast Brick TY - Z88 is a high - performance refractory material that can effectively solve the problems faced by the glass furnace industry. With its two models and excellent performance, it offers customers a flexible and reliable solution for glass production. Contact us now to select the most suitable model and application plan for your glass furnace!