.jpg?x-oss-process=image/resize,h_1000,m_lfit/format,webp)
In the glass production industry, manufacturers often face a range of challenges, from wear - resistant issues of furnace materials to poor resistance to glass liquid, which can lead to reduced production efficiency and increased costs. However, there is a product that can effectively solve these problems - Fused AZS TY - AZS33.
Fused AZS TY - AZS33 is made from pure alumina powder and zircon sand. Zircon sand, with the chemical formula ZrSiO₄, is an important raw material. The combination of pure alumina powder and zircon sand forms an Al₂O₃－ZrO₂－SiO₂ system. This system is crucial for the performance of the product. Alumina (Al₂O₃) provides high - temperature resistance and hardness, zirconia (ZrO₂) enhances the corrosion resistance, and silica (SiO₂) helps in the formation of a stable structure.
Based on its unique composition, Fused AZS TY - AZS33 forms a dense microstructure. This dense structure gives it strong resistance to glass liquid. In comparison with other common materials used in glass furnaces, such as some ordinary refractory bricks, Fused AZS TY - AZS33 shows a much lower erosion rate. For example, in a test environment with a glass liquid temperature of 1400°C, the erosion rate of ordinary refractory bricks was about 5% per month, while the erosion rate of Fused AZS TY - AZS33 was less than 1% per month.
Fused AZS TY - AZS33 can be used in various parts of glass furnaces. In the melting zone, where the temperature is high and the glass liquid is in a highly active state, its high - temperature resistance and glass - liquid resistance ensure long - term stable operation. In the throat area, which controls the flow of glass liquid, its excellent wear resistance can prevent the material from being worn out quickly. In the working end, where the quality of the glass liquid is crucial, Fused AZS TY - AZS33 can maintain the purity of the glass liquid, thus improving the quality of the final glass products.
A glass manufacturing company in [Company Location] used Fused AZS TY - AZS33 in their glass furnace. Before using this product, they had to replace the furnace lining every 1 - 2 years due to severe erosion. After replacing with Fused AZS TY - AZS33, the service life of the furnace lining was extended to more than 5 years. This not only reduced the replacement cost but also significantly increased the production efficiency because the downtime for maintenance was greatly reduced.
Fused AZS TY - AZS33 perfectly combines material composition and performance. Its scientific formula based on pure alumina powder and zircon sand, along with the resulting excellent performance, makes it an ideal choice for glass production. If you are a glass manufacturer looking for a reliable glass furnace material, don't miss Fused AZS TY - AZS33. Make a wise decision based on its proven performance and scientific composition, and take your glass production to a new level.
Contact us now to learn more about Fused AZS TY - AZS33 and start improving your glass production process!
.jpg?x-oss-process=image/resize,m_fill,h_200,w_200/format,webp)
